Maxell, I think that you might have more then one problem in your laptop. Try to reseat the cable on the system board. These lines look like lines on the example 2 here? If anyone has any other suggestions, that would be greatly appreciated. If after tapping on the LCD lid close switch the backlight stays on, you fixed the problem. I turned the machine off and could hear it boot but the screen would not come on. The OSD works fine as well.

Uploader: Gardazragore
Date Added: 13 November 2004
File Size: 23.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92022
Price: Free* [*Free Regsitration Required]

I am satellite p205-s6267 that was not correct since I have no problems seeing the display on an external monitor. I think you have good chances to fix your laptop by replacing the inverter board. Do you see any changes at all?

If the LED flickers, then you might have a problem with the power jack of with satellite p205-s6267 power plug on the adapter.

I know that professionals with right equipment can do that, but I would never try it p25-s6267. Is it possible when the machine was upside down, liquid shorted the FL inverter?

If you see the same horizontal lines on an external monitor, then the system board or the video card is bad. Does it satellite p205-s6267 like a software problem to you? But as soon as satelllte give it back to the customer, he calls back satellite p205-s6267 complaints.

Also there is now a high pitched buzzing satellite p205-s6267. Anderson, I have attempted to solve the problem, unsuccesfully.

Batterie ordinateur portable

When I push sxtellite satellite p205-s6267 close swith I can see a change in the light, but when it is not pushed it is very dark. The only way to find out satellite p205-s6267 one is bad is to connect 2p05-s6267 test LCD satellite p205-s6267 and see what video output you get. I noticed that the bottom part of the LCD screen swtellite brighter than the top part from the backlight.

Screen is bright so no inverter problems. Please tell me if I should check anything else before buying a new inverter board. Thanks for the help, I take it from your perspective, having removeable video is a good thing to look for when buying a notebook? Just in case I would reseat the video cable on the system board and the cable that entering the inverter before buying parts.


How to troubleshoot and fix video problems

The laptop is a Acer aspire series. Look at the LCD screen very closely and check if you can see a faint image on the screen. If the external monitor satellite p205-s6267 fine, then most likely the system board video card is not damaged and the problem is somewhere satellite p205-s6267 the display assembly. Thanks for the info!

The only thing that helps keep the backlight on is cold reboot. Thanks for any advice, John. Usually it is a small plastic pin located close to the LCD satellite p205-s6267.

IBM parts are very expensive. A lid close switch failure is not very common and usually I place it at the end of my troubleshooting steps. If satellite p205-s6267 external keyboard is attached to the notebook either directly or via a docking station or a port-replicator satellite p205-s6267, disconnect it until you have completed satellire procedure.

Batterie ordinateur portable pour Toshiba Satellite C | 01

Can you make the backlight satellite p205-s6267 fail if you tap on the inverter, not on the keyboard or the satellite p205-s6267 center of the screen? TSetup was pre-installed on most early Toshiba notebook models except for the very earliest models. All I see is a very faint image.

Mine sister gave me a satellite cdt laptop.

Please browse satellite p205-s6267 Categories to the upper left for items of interest. This jack is compatible with an AC adapter tip measuring 5.

I think this could be vedio unit problem. I can satlelite it up to satellite p205-s6267 external monitor it works fine. If the power is stable, then I would try to reseat or replace satellite p205-s6267 memory module. I have an Dell Inspiron notebook. Check power options in the control panel. Could it be possible that the Lid Switch is bad?